PMA 6000 Panel Audio

Precio:
Precio 6000S:
Precio 6000M:
Precio 6000MS:
Consultar precio de instalacion

FEATURES
  • Designed to be pin-compatible with the Bendix/King KMA-24 audio selector panel
  • Combines versatile selector panel with six-place, keyed intercom
  • Stereo version ("S" version) with stereo inputs
  • Offers marker-beacon receiver ("M" version) with marker self-test
  • Available with third comm input ("C" version)
  • Split pilot and copilot communications capability allows crew to independently and simultaneously use both radios even transmitting simultaneously on different frequencies
  • Split music inputs for front and back seat usage
  • Independent volume and squelch controls for pilot and copilot
  • Soft Mute technology subtly ramps music down when conversation comes across either intercom or radio
  • Remote swap function allows pilots to use a yoke-mounted switch to select Comm 1 and Comm 2 options without reaching for panel
  • Muting for selected receiver during transmit when in COM1 or COM2 mode
  • Separate voice and audio amplifiers for passengers
  • Backlit switches with photo sensor
  • Fail-safe feature automatically hard-wires pilot to Comm 1 in case of outtage
  • One-minute Digital Recorder available as option
  • Available with black or silver trim for faceplate
  • 3 year warranty on factory new units


  • * TO DOWNLOAD THE INSTALLATION MANUAL, CLICK HERE
    * TO DOWNLOAD THE WIRE DIAGRAM (TOP), CLICK HERE
    * TO DOWNLOAD THE WIRE DIAGRAM (BOTTOM), CLICK HERE
    (FILES REQUIRE ADOBE ACROBAT PDF VIEWER TO VIEW, CLICK HERE TO DOWNLOAD THE READER IF YOU DO NOT ALREADY HAVE IT)

SPECIFICATIONS
FAA TSO: C50c, C35d, DO-160b, DO-170, DO-143 Env. Categories: A1D1/CAMXXXXXXBBBBBAAX
Max. Current: 1 amp Operating Current: 350mA (typical, speaker off), 600mA -speaker on (1 amp peak)
Temperature: -20 to 55C Altitude: 50000 ft.
Dimensions: 6.25"W x 1.3"H x 6.8"D Weight: 0.8 lbs.
Input Impedence: 510 Ohms for all audio inputs Input Isolation: >60dB (70dB typical)
Marker Frequency: 75 MHz crystall controlled Marker Sens: 200 uVolts (high), 1000 uVolts (low)
Marker Selectivity: -6dB at 110kHz, -40dB at 120kHz Marker Lamp Output: 9.0 Volts (when active) @ 125 mA