KI-209A Indicador

Precio OH:
Consultar precio de instalacion

Image shown is KI-209 due to similarities in appearance between units.
  • Navigation Indicator that provides OMNI (VOR) or LOCALIZER (LOC) information along with Glideslope Deviation from Glideslope needle when used with external Glideslope Receiver
  • Features internal relay to switch between VOR/LOC and GPS modes (external selector switch required to utilize this function)
  • Internally lighted
  • Plastic bezel with plastic lens
  • Can be used with KN-53 and KNR-630/631/632 nav receivers, KX-155 and KX-170/175 nav/comms
  • Interfaces with KLN-89/89B GPS units (see note below)
  • Can be used with KN-73/75 Glideslope Receivers and Glideslope portions of KGM-681/691 Glideslope/Marker Beacon Receivers and KNR-630/631 NAV/GS/MB receivers
  • Similar to KI-208A indicator but DOES include Glideslope Deviation Indication
  • Operates on any voltage between 11 to 33.6 volts without an external adapter
  • NOTE: Will only interface with KLN-89/89B GPS units not the KLN-90B
Size: 3.25"W x 3.25"H x 8.0"L Weight: 1.0 lbs.
Input Impedence (VOR/LOC): 50K ohms, Nominal Nominal Composite Input Level: LOC: 0.33VRMS +-10%; VOR: 0.50VRMS +-10% ARINC phased
OMNI Accuracy: +-2 deg. Max Error, +-1 deg. Typical OMNI Sensitivity: +-10 deg. off course gives full scale deflection
Localizer Sensitivity: 4dB tone ratio will give 3 dot scale deflection External Load: ARINC Autopilot Deviation (Two 1K loads)
Input Impedence (GS meter): 1K ohms +-5% Deflection Sensitivity (GS meter): 150uA +-5% for full scale deflection
Input Impedence (GS Flag): 1K ohms +-5% minimum Deflection Sensitivity (GS Flag): 125uA for flag to leave stop; 260uA maximum for fully concealed flag

Part Number VOR/LOC/Glideslope Indicator Description
066-03056-0011 VOR/LOC Glideslope Indicator with VOR/LOC Converter & GPS Display
NOTE: Same base part number used for KI-208, KI-208A, and KI-209 indicators